Show slides from smartphone with DIY screen

How do you do show slides when the audience is too large to peer at your laptop, and there’s no TV or audio-visual equipment in the room – not even a blank wall to project slides onto? Here’s what I improvised for the “Hamilton: Man and Musical” talk I gave a few weeks ago in a rehearsal studio in midtown Manhattan.

The rehearsal studio had one long mirrored wall, two short walls with brown foam soundproofing, and a long wall of four or five huge windows – fortunately with heavy drapes.

I knew I’d have to buy equipment, but it had to be inexpensive, small and lightweight, and preferably something I could use for other purposes than giving talks with slides.  Here’s the kit I carried to the venue. Details below.

The tech

1. Brookstone Pocket Projector Micro, list price $149.99. It projects an image with up to a 50-inch diagonal. Needs to be plugged in while it’s running, so a mini-USB charger for it is in the kit. Another use for this projector: plug it into your laptop via the included HDMI cable, and the image from your 15-inch screen will be 50-inch. I didn’t want to lug my laptop around, though, so I bought the next item on the list.

Brookstone Projector. Small!

Brookstone Projector. Small!

2. ActionTec ScreenBeam Mini2. This is the bridge from the projector to the phone: it plugs into the HDMI port on the projector.  It uses some weird local means of communication, so I didn’t have to worry about whether the studio had wi-fi or phone reception. The ActionTec won’t run unless it’s plugged in, so that adds a second mini-USB charger to the kit. Another use for this gizmo: plug it into an HDMI port on the back of your TV, and you can make anything that’s running on your phone – the Guides Who Know Monuments of Manhattan app, for example – magically appear on your TV screen. The video will run a bit less smoothly than if you plugged your laptop into the TV via a cable, but still, it works.

ActionTec ScreenBeam Mini2. Smaller!

ActionTec ScreenBeam Mini2. Smaller!

3. Tripod: this Acuvar model holds a camera or a smartphone; the Brookstone projector uses the camera mount. The original GorillaPod will hold the projector and latch onto the back of a chair, but that limits how high you can have the projector – and if the chairs in your venue are slippery metal, the GorillaPod holding all that tech will wobble. A real tripod is more secure and more versatile, and as it happened, I already owned one.

Projector with ActionTec attached, each with a battery pack attached, rather than being plugged in. The battery packs are in the blue mesh bag dangling from the tripod.

Projector with ActionTec attached. In this photo, each gizmo has a battery pack attached, rather than being plugged in. The battery packs are in the blue mesh bag dangling from the tripod. Since I needed more chargers than I had battery packs, I ended up taking a surge protector / extension cord, and multiple chargers.

4. Miracast app (free in the Google Play store), which allows the ActionTec and projector to mirror what’s on my phone. It’s a bit quirky – sometimes takes one or two tries to connect – but so far, it has always come through in the end.

miracast

5. Android phone. I know the Brookstone projector and ActionTec set-up works with my Samsung Galaxy S6; your mileage may vary. Since the projector shows what’s on screen, the phone has to be on all the time, so a third charger gets added to the kit.

Making it work

  1. Plug the ActionTec into the projector’s HDMI port.
  2. Plug chargers into the projector and the ActionTec, and then into the surge protector.
  3. Turn on the projector.
  4. Plug the phone into the charger and the surge protector. Set it never to go to sleep.
  5. Open Miracast on the phone. Wait for it to connect to the ActionTec. The spinning “I’m-so-very-busy” circle may keep appearing, but if the grayish-blue circle appears at the upper right of the screen, you should be good to go. NOTE: If you touch that blue circle after the connection is made, the connection may be cut. When you want to close the connection, hold and drag the blue circle to the “x” that appears near the top of the screen.
The Miracast icon is toward the upper right. It does not appear on the image shown by the projector.

The Miracast icon is the grayish-blue circle toward the upper right. It does not appear on the image shown by the projector.

When I gave my talk, I had my phone on a music stand in front of me, so that I could swipe it to change the slides. The tripod with the projector and ActionTec sat 8-10 feet away. Since the lights were all out, I also had my husband’s phone, plugged into the wall, so I could use its flashlight app to read my notes.

This is my personal best for amount of tech running at once.

The screen

I saw instructions online for making a screen out of Tyvek, but my local Home Depot didn’t have any. This DIY screen works at least as well – perhaps better, since its thickness makes it less likely to shift about in air currents.

To make it, you need:

  • Home Depot Roller Shade (interior), light-filtering white. I used half of a 37” w x 72” H shade ($9.97), so my screen is more or less square, at 37 x 36 inches. Since the projector shows a theater-size image (16:9), however, much of the screen is wasted. At some point I’ll remake my screen using a 60″ wide shade. Whatever brand or roller shade you use, be sure it’s not shiny – the projector would probably cause glare.
  • A tension rod that will expand to about an inch wider than the width of the shade.
  • String, about 1.5 times the width of the shade.
  • Duct tape.
  • Optional: mailing tube 1-2″ or so longer than the width of the finished screen, to carry it in.

Here are the steps.

Roller unrolled.

1. Shade unrolled. The roller mechanism is at one end; a narrow wooden slat (the weight that makes it hang straight) is at the other.

Roller shade cut in half widthwise. I'm using bottom half, with a thin stick rather than the roller mechanism.

2. Shade cut in half across the width. I’m using the bottom half (on the left), with the wooden slat, to make it lighter to carry. If you’re creating a very wide screen, you might want to use the roller end for extra support.

Cut a notch on each end of the shade, so half an inch or so of the wooden stick is exposed. Tie a length of string, allowing plenty of slack.

3. Cut a notch on each end of the shade, so half an inch or so of the wooden slat is exposed. Cut a string at least 1.5 times the shade’s width. Tie the string to both ends of the wooden slat. That’s the top of the screen.

Expand a tension rod so its rubber tips are extend just past the edges of the shade, at either side. Lay the tension rod on the shade and roll it over a few times. Tape in place with duct tape.

4. To keep the screen from wobbling about, add a weight at the bottom. Expand a tension rod so its rubber tips extend just past the left and right sides of the shade. Lay the tension rod at the bottom of the shade and roll the shade over it over a few times. Tape the roll in place with duct tape. This side will, of course, be the back.

Finished screen.

5. Finished screen, held up by an over-the-door hook. When you roll the screen up to move it, don’t fasten it tightly with rubber bands: they’ll leave marks on the plastic. Popping it into a mailing cylinder of the right length is better.

shower-suction-cups-s-l300

6. To hold the screen on a mirrored wall, I used suction cups – I had this gizmo on hand. Wetting the suction cups before attaching makes them stick longer.

Slideshow

I created slides in Photoshop Elements using 16:9 proportions (to fit the Brookstone projector), always against an unobtrusive soft gray background. I saved each as a JPG, numbered sequentially.

Slide from Hamilton: Man & Musical talk.

Slide from Hamilton: Man & Musical talk.

Alas, my phone’s File Manager refused to put the numbered slides in the right order. So I used the New / Google Slides option in Google Drive, pasted the images into the most stripped-down template, and then chose the Work Offline option. I emailed the Slideshow PDF to myself, saved it to my phone, and opened it while I still had phone service and wi-fi, just to make sure it was there.

Worked like a charm!

More

  • Comments or questions? Email me: DuranteDianne@gmail.com.
Posted in Tours Tagged permalink

About Dianne L. Durante

I’m an independent scholar and freelance writer /lecturer on art and art history, with forays into food, history, politics, and publishing. My most recent projects are *Innovators in Sculpture¸* a survey of 5,000 years of art in two hours, and *Monuments of Manhattan,* a videoguide app by Guides Who Know that’s based on my book *Outdoor Monuments of Manhattan: A Historical Guide.*

Comments are closed.